The Laser Cutter isn’t Working! Troubleshooting in Metropolis
Other laser cutting guides:
Detailed instructions that are particular to a specific make, model, and/or shop.
Other laser cutting guides:
I have found the factory first layer calibration routine on the Prusa MK3S+ to be effective, but somewhat frustrating. It relies on visually inspecting the…
Difficulty: 2 Moderate Time required: 15 minutes to 1 hour Tools needed: – CNC Prototrak lathe – Threading tool, internal or external, sized appropriately for…
Step 1 Import and Clean File Open ProtoMax Layout File | Import from Other CAD Clean button on right side of screen If the drawing…
Hazard Class: 3 Applies to: Metropolis, The Deep Difficulty: Easy Time Required: 20 minutes to 2 hours Tools needed: – Waterjet – Dial Caliper Introduction…
Difficulty: 2 – Moderate Applies to: Metropolis Time: 5 to 20 minutes Tools needed: – Ironworker Wrench – Ironworker Gage Wire – Ironworker Hex Key…
Machine Hazard Class: 3 Applies to: Metropolis Machine Status on Mobius: Universal VLS 3.50 Step 1 — Ensure that your material is safe to cut.…
Machine Hazard Class: 3 Applies to: Metropolis Machine Status on Mobius: Epilog Fusion Step 1 — Ensure that your material is safe to cut. Check…
Machine Hazard Class: 3 Applies to: Metropolis Machine Status on Mobius: Epilog Zing Step 1 — Ensure that your material is safe to cut. Check…
Difficulty: 3 Difficult Time: 2-4 Days Tools needed: – Form 2 or 3 printer – Diagonal Cutter – Hacksaw Blade – Sandpaper – Kiln NOTE:…