Change the Punch and Die on the Ironworker
Difficulty: 2 – Moderate Applies to: Metropolis Time: 5 to 20 minutes Tools needed: – Ironworker Wrench – Ironworker Gage Wire – Ironworker Hex Key…
Category: Metal Fabrication
Machines and techniques that treat metal sheet, tube, and bar as elements to be joined into assemblies
Training Guide: MIG Welded Desk Organizer
Step 1 — MIG Training – Desk Organizer Hotworks safety: hot things are hot (also assume everything is hot, wear gloves) Smoky things need ventilation…
TIG Welded Chimenea
Step 1 — Waterjet the files Take .dxf files to water jet. Cut out 4x outer panels, 1x lower holder and 1x upper holder Take…
Cold Saw Checklist
Operation Turn on 3 power switches Check coolant flow, add water if needed Clamp workpiece in vise Cut by pulling down with one hand Vacuum…
Sources for Materials
List of vendors who supply useful materials. This list is focused on easy-to-access vendors, who either have a local retail store, an online storefront, or…